Mazda Convertible MX-5 Miata Infotainment screen delaminating
What this problem usually means
Many ND MX-5 Miata owners report the infotainment screen delaminating - tiny white cracks that look like crystallization, also called spider webbing - which happens more often when the car is parked outside in hot sun as the screen adhesive breaks down. Mazda released a TSB for the delamination and recommends replacing the digitizer.
Likely causes
- infotainment screen adhesive breakdown from heat → Shop the infotainment screen at Amazon
- delaminating touchscreen digitizer
How to fix it — step by step
- Look for white crystalline cracks spreading across the screen, especially on 2016 to 2017 cars
- Check whether the car is still under warranty, as Mazda's TSB remedy is warranty-based
- Have a dealer confirm the TSB applies and replace the digitizer
- Out of warranty, have the touchscreen digitizer or screen replaced with a quality unit → Shop the touchscreen digitizer at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the touchscreen digitizer.
Shop the touchscreen digitizer at Amazon
Also tied to this fault: infotainment screen - Shop at Amazon
Parts that commonly fix it
- touchscreen digitizer - Shop at Amazon
- infotainment screen - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.