Maytronics Dolphin Pool cleaner M600 Red light on (constant)
What this problem usually means
The indicator light on the robot itself is a constant red: robot error. (Blue blinking is normal operation; green blinking means a remote control or smartphone is communicating with the robot.)
Likely causes
- A robot fault — work through the manual's troubleshooting table: power/cable problems, a blocked impeller, tracks or wheels, or a clogged filter basket
How to fix it — step by step
- Check the Troubleshooting section items in order: power supply and cable connections first, then impeller, tracks and wheels for obstructions, then the filter basket
- If none of the solutions solve the issue, contact your dealer to check the robotic pool cleaner
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.