Maytronics Dolphin Pool cleaner M600 Does not turn or moves in one direction only
What this problem usually means
The robot will not turn, or it only ever travels in one direction.
Likely causes
- Debris stuck in the impeller house or impeller cover
How to fix it — step by step
- Switch off and unplug the power supply
- Remove the debris stuck in the impeller house or impeller cover
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.