Maytag Washer Top-Load (Tech Manual W11521160) F0 E3 Error Code
What the F0 E3 code means
Overload: the main control detects a load size that exceeds the washer's capacity, or the basket cannot be turned.
Likely causes
- Load size exceeds washer capacity
- Item stuck between the basket and tub causing friction
- Mechanical friction on the drive mechanism
How to fix it — step by step
- Remove excess laundry from the basket
- Check for an item caught between the basket and tub
- Restart the cycle with a smaller, loose load
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the F0 E3 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Maytag manual is on Maytag's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.
Related Maytag Washer Top-Load (Tech Manual W11521160) error codes
See all Maytag Top-Load (Tech Manual W11521160) codes & guides →