LG Robot vacuum HOM-BOT Turbo+ Diagnosis mode cannot be operated due to a low battery.
What this problem usually means
Smart Diagnosis result: diagnosis cannot run because the battery is low.
Likely causes
- Battery charge too low
How to fix it — step by step
- Try the Smart Diagnosis again after recharging the battery (dock the Robot Cleaner to the home station to charge)
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official LG manual is on LG's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related LG Robot vacuum HOM-BOT Turbo+ problems
- Please check for dirt on the left wheel.
- Please check for dirt on the right wheel.
- Please check if the dust bin is installed with the filter.
- Please check the brushes for obstructions.
- Please remove foreign material on the left/right wheel.
- Please wipe the lower camera sensor on the right bottom of the Robot Cleaner.
- Please wipe the obstacle detecting sensor window on the left and right side of the Robot Cleaner.
- Robot Cleaner cannot continue cleaning. Please check the area around Robot Cleaner.
- Smart Diagnosis has failed to operate.
- The wheels are not touching the floor. Please move Robot Cleaner onto flat floor.
- A problem has been found in the acceleration sensor.
- A problem has been found in the suction motor.