LG Robot vacuum HOM-BOT Square Please clean the obstacle detecting sensor windows on the left and right side of the HOM-BOT.
What this problem usually means
Smart Diagnosis result: the obstacle detecting sensor windows need cleaning.
Likely causes
- Obstacle sensor windows dirty
How to fix it — step by step
- Clean the lens of the Obstacle Sensors on both the left and right hand sides
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official LG manual is on LG's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related LG Robot vacuum HOM-BOT Square problems
- Please remove any foreign material on the left/right wheel.
- Smart diagnosis has failed to complete its diagnostics.
- The wheels are not touching the floor. Please move HOM-BOT onto flat floor.
- Unable to initiate smart diagnosis due to a low battery.
- A problem has been found in the acceleration sensor.
- A problem has been found in the suction motor.
- A problem has been found on the Gyro Sensor.
- A problem has been found on the left wheel sensor.
- A problem has been found on the right wheel sensor.
- A problem has been found with the brush. Please check for any foreign material.
- Battery is low. Please move HOM-BOT onto the home station to charge.
- HOM-BOT cannot continue cleaning. Please check the area around it.