Levoit Air purifier Vital 200S Check Filter Indicator

What this problem usually means

The Check Filter Indicator lights up red when the filter should be checked. Depending on use it should turn on after about 12 months; the VeSync app also shows remaining filter life and sends a notification, calculated from air quality, amount of use and other factors based on 12 hours of daily use.

Likely causes

  1. Filter has reached the check interval (about 12 months of use)
  2. Frequent use or high pollution bringing the check interval forward

How to fix it — step by step

  1. Replace the True HEPA / Activated Carbon Filter (recommended every 12 months, earlier in high-pollution environments or if the purifier no longer filters odours effectively, noise increases, airflow decreases, unusual odours appear, or the HEPA filter is visibly dusty or discoloured after removing the pre-filter) → Shop the true hepa / activated carbon filter at Amazon
  2. Turn on the air purifier
  3. Press and hold the Sleep Mode button for 3 seconds to reset the Check Filter Indicator - the indicator flashes and turns off when successfully reset, and filter life shows as 100% in the VeSync app
  4. If the filter was changed before the indicator lit up, turn the purifier on after replacing it and press and hold for 3 seconds the same way

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Levoit Air purifier Vital 200S problems

See all Levoit Vital 200S codes & guides →