Levoit Air purifier Core 300S Check Filter Indicator
What this problem usually means
The Check Filter Indicator lights up when it is time to check the filter, typically within 6-8 months of use. Filter life can also be checked in the VeSync app.
Likely causes
- Filter has reached the check interval (typically 6-8 months of use)
How to fix it — step by step
- Check the filter and replace it every 6-8 months, or sooner if you notice increased noise, decreased airflow, unusual odours or a visibly clogged filter
- Clean the pre-filter every 2-4 weeks using a soft brush or vacuum hose to remove hair, dust and large particles; do not clean the filter with water
- After replacing the filter, turn on the air purifier and press and hold the Sleep Mode button for 3 seconds to reset the indicator - it turns off when successfully reset
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the True HEPA 3-Stage Original Filter.
Shop the True HEPA 3-Stage Original Filter at Amazon
Also tied to this fault: Core 300-RF filter - Shop at Amazon
Parts that commonly fix it
- True HEPA 3-Stage Original Filter - Shop at Amazon
- Core 300-RF filter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.