Levoit Air purifier Core 300S Air Quality Indicator always stays red
What this problem usually means
The Air Quality Indicator always stays red, per the Core 300S troubleshooting table.
Likely causes
- AirSight Plus Laser Dust Sensor needs cleaning
- Ultrasonic humidifier mist near the purifier affecting sensor accuracy
How to fix it — step by step
- Clean the AirSight Plus Laser Dust Sensor - clean it every 3 months by vacuuming the sensor openings for at least 10 seconds
- Avoid using an ultrasonic humidifier near the purifier, as its mist can affect sensor accuracy
- Consider using a mode other than Auto Mode while a humidifier is running nearby
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.