Land Rover SUV Range Rover Oil leak from valve cover gasket

What this problem usually means

Oil leaks are nearly universal on higher-mileage Range Rovers, and the valve cover gaskets on both the V6 and V8 engines are one of the most common sources, along with the oil filter housing gasket on the 3.0-litre supercharged V6. A small driveway spot can be monitored, but oil dropping onto hot exhaust parts is a fire risk.

Likely causes

  1. Valve cover gasket hardened or shrunk with age and heat → Shop the valve cover gasket at Amazon
  2. Oil filter housing gasket leaking (3.0-litre supercharged V6) → Shop the oil filter housing gasket at Amazon
  3. Rear main seal seepage on high-mileage examples

How to fix it — step by step

  1. Check the oil level and top up to the mark so the engine is not run low
  2. Look for fresh oil around the cam covers and a burning-oil smell after driving
  3. Clean the area and re-check after a short drive to confirm the leak point
  4. Have the leaking gasket or seal replaced; do not just keep topping up if oil reaches the exhaust

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Land Rover SUV Range Rover problems

See all Land Rover Range Rover codes & guides →