Land Rover SUV Range Rover Sport Coolant leak from expansion tank

What this problem usually means

Cooling system failures are persistent across Range Rover generations, and the plastic coolant expansion tank is a common failure point: it cracks with age and heat cycling. Warning signs are dried coolant staining around the tank or a low coolant level without a visible external leak. The thermostat housing and water pump are the other usual leak points.

Likely causes

  1. Plastic expansion tank cracked with age and heat cycling
  2. Thermostat housing warped or cracked (several V8 variants)
  3. Water pump shaft seal weeping → Shop the water pump at Amazon
  4. Rubber coolant hoses stiffened and cracked with age

How to fix it — step by step

  1. Check the coolant level when the engine is fully cold
  2. Look for dried coolant staining around the expansion tank, thermostat housing and hoses → Shop the coolant expansion tank at Amazon → Shop the thermostat housing at Amazon
  3. Do not open the system hot, and do not drive if the temperature gauge climbs - overheating causes head gasket damage
  4. Have the cooling system pressure-tested and the failed tank, housing, pump or hose replaced

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Land Rover SUV Range Rover Sport problems

See all Land Rover Range Rover Sport codes & guides →