Land Rover SUV Evoque Engine rattling noise on cold start

What this problem usually means

On Evoque models with the 2.0-litre Ingenium diesel or petrol, the timing chain stretches prematurely due to worn plastic guides and degraded lubrication from oil dilution; chains fitted before 2019 are particularly affected and a chain snap is possible. Symptoms are a metallic rattling on cold start, the engine warning light, power loss and fault codes P0016 or P0341.

Likely causes

  1. Timing chain stretch from worn plastic guides (pre-2019 chains most affected) → Shop the timing chain guide at Amazon
  2. Oil dilution degrading chain lubrication (diesel)
  3. Timing chain tensioner wear → Shop the timing chain tensioner at Amazon

How to fix it — step by step

  1. Listen for a metallic rattle in the first seconds of a cold start
  2. Scan for P0016/P0341 timing correlation codes
  3. Do not keep driving on a rattling Ingenium - a snapped chain destroys the engine
  4. Replacement of the chain, guides and tensioners is a major job (gearbox removal on this engine) for a specialist

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Land Rover SUV Evoque problems

See all Land Rover Evoque codes & guides →