Land Rover SUV Defender Infotainment system faults
What this problem usually means
Pivi Pro infotainment faults and software updates are among the things current Defender owners ask about most, alongside battery drain and air suspension warnings. Many Pivi Pro issues are software-related, so update history is part of the diagnosis.
Likely causes
- Pivi Pro software faults needing an update
- Weak 12-volt battery causing screen shutdowns to save power
- Infotainment module fault (less common)
How to fix it — step by step
- Note whether the fault is a freeze, a blank screen, or a failure to start, and whether it happens from cold
- Check the 12-volt battery health - low voltage causes multiple electronic complaints at once
- Check for and apply Pivi Pro software updates
- If faults persist on current software and a healthy battery, have the module diagnosed with JLR Pathfinder-level tools
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the infotainment control module.
Parts that commonly fix it
- infotainment control module - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.