Land Rover SUV Defender Coolant leak from plastic coolant pipes

What this problem usually means

Coolant leaks are among the faults Defender owners ask about most. On the 3.0 supercharged V6 and 5.0 V8, water pumps, thermostat housings and plastic coolant pipes leak with heat and age; plastic pipes, thermostat housings, water pumps and expansion tanks are the documented leak points across the range. A sweet smell or a falling coolant level is the early sign.

Likely causes

  1. Plastic coolant pipes cracked with heat and age
  2. Thermostat housing leaking
  3. Water pump leaking → Shop the water pump at Amazon
  4. Expansion tank cracking

How to fix it — step by step

  1. Check the coolant level cold and look for a sweet smell from the engine bay
  2. Look for dried coolant traces around pipes, the thermostat housing and the pump → Shop the thermostat housing at Amazon → Shop the coolant pipe at Amazon
  3. Have the system pressure-tested to find the leak before replacing parts
  4. Replace the failed pipe, housing, pump or tank and refill with the specified coolant; do not drive on a climbing temperature gauge

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Land Rover SUV Defender problems

See all Land Rover Defender codes & guides →