Kia SUV Sorento Steering Clunk

What this problem usually means

A clicking or clunking felt in the wheel when turning, typically after 50,000 miles, is the Sorento's MDPS flexible coupling failing: the small rubber star inside the electric steering motor disintegrates, adding free play between motor and column. Kia's formal coupling programme (CS1604/WTY006) was written around Optima, so Sorento coverage is by VIN, not automatic.

Likely causes

  1. Disintegrated MDPS rubber flexible coupling in the steering column
  2. Worn steering column/intermediate shaft joints
  3. Tie-rod or suspension wear clunking instead of the column
  4. MDPS motor fault where a warning light and heavy steering join the noise

How to fix it — step by step

  1. Rock the wheel gently at standstill: a click/clunk with free play before the wheels move is the coupling signature
  2. Separate it from suspension noise - coupling noise happens stationary; ball-joint/tie-rod noise needs bumps or load
  3. Check for an EPS warning light or heavy steering; those change the diagnosis from coupling to MDPS motor/column → Shop the steering coupling at Amazon → Shop the steering column at Amazon
  4. Ask a Kia dealer to check your VIN for any MDPS warranty extension or TSB before paying - coverage varies by model and year
  5. Budget for column/MDPS work at a shop if the coupling is confirmed; it sits inside the steering motor assembly

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Kia SUV Sorento problems

See all Kia Sorento codes & guides →