Kenmore Washer uL Error Code

What the uL code means

Unbalanced load on Kenmore 110-series (Whirlpool-built) Oasis top-load washers. The washer runs an imbalance correction routine at the end of the wash and before final spin, and shows uL if the load stays uneven.

Likely causes

  1. Load bunched on one side of the basket
  2. Single heavy item such as a bath mat or robe
  3. Washer not level

How to fix it — step by step

  1. Open the lid and redistribute the load evenly around the basket
  2. Add one or two similar items if washing a single heavy item
  3. Close the lid and press START to resume
  4. Check the washer is level if uL happens with normal loads

Parts that commonly fix the uL code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Kenmore washer error codes

See all Kenmore washer codes & guides →