Kenmore Washer F21 Error Code
What the F21 code means
Long drain on Kenmore 110-series (Whirlpool-built) high-efficiency front-load washers: drain time exceeds about 8 minutes and the water valves turn off. This is a different platform from the 796 letter codes, where slow drain shows as OE.
Likely causes
- Drain hose kinked, frozen or clogged
- Drain hose raised more than 96 inches or sealed into the standpipe
- Clogged drain pump filter
- Failed drain pump
How to fix it — step by step
- Select PAUSE/CANCEL twice and unplug the washer
- Check the drain hose is not kinked, frozen or clogged and is installed correctly
- Clean the drain pump filter behind the lower front panel
- Reconnect power and restart; replace the drain pump if it does not run
Parts that commonly fix the F21 code
- drain pump - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.