Jeep SUV Cherokee Engine stalling

What this problem usually means

Cherokees, including the 2015 and 2019 model years discussed by CarParts.com, can suddenly shut down while in motion with no dashboard fault indication. The problem is linked to the defective 9-speed transmission, whose hard shifting, lurching and wiring harness defects can cause a stall or a sudden shift to neutral, and some vehicles also stall when the oil level falls low.

Likely causes

  1. defective 9-speed transmission shifting to neutral or causing a stall
  2. transmission wiring harness defects
  3. low engine oil level, with stalls reported as the oil life indicator falls

How to fix it — step by step

  1. Stop driving the vehicle if it stalls in traffic, and have it towed rather than repeatedly restarting it
  2. Check by VIN whether the recall applies, including the 2019 2.4L transmission calibration recall described in the source
  3. Check the engine oil level and top up if low, noting whether stalling stops afterwards
  4. Scan for stored codes even if no warning light stayed on, and record when the stall happens
  5. Have a shop test the transmission, its wiring harness and the power distribution unit and repair the fault found → Shop the transmission wiring harness at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Jeep manual is on Jeep's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Jeep SUV Cherokee problems

See all Jeep Cherokee codes & guides →