iRobot Robot vacuum Error 1

What this problem usually means

Uneven ground: Roomba is on an obstacle or uneven surface and its left wheel is hanging down or stuck. On 600 series robots the same message covers either side wheel hanging down or the robot being stuck.

Likely causes

  1. Robot on an obstacle or uneven surface
  2. Left wheel hanging down or stuck
  3. Debris trapped in the left wheel well

How to fix it — step by step

  1. Move Roomba to a flat surface in the centre of the room and press CLEAN to restart
  2. Push the wheels up and down several times and shake out loose debris from the wheel well
  3. Turn both wheels briskly by hand and check they turn freely with the same resistance
  4. Use a Virtual Wall barrier to keep Roomba away from the problem area if it repeats

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related iRobot robot vacuum problems

See all iRobot robot vacuum codes & guides →