iRobot Robot vacuum Error 10

What this problem usually means

A wheel problem: the right wheel encoder is not registering, or the right wheel is on the ground but the robot cannot sense it. On 600 series robots a side wheel is stuck or the bumper is not registering obstacles.

Likely causes

  1. Right wheel jammed or obstructed
  2. Debris in the right wheel well
  3. Wheel encoder fault in the right wheel module

How to fix it — step by step

  1. Move Roomba to a flat surface
  2. Push the right wheel up and down and turn it by hand to clear debris
  3. Check both wheels turn freely with equal resistance
  4. Press CLEAN to restart, and contact iRobot Customer Care if it repeats

Parts that commonly fix it

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related iRobot robot vacuum problems

See all iRobot robot vacuum codes & guides →