Hyundai SUV Palisade Engine loses power
What this problem usually means
Palisade loss of power shows up as sluggish acceleration, difficulty maintaining speed, misfires and reduced fuel efficiency. Documented causes include a clogged air filter, faulty fuel injectors and exhaust-system problems.
Likely causes
- clogged engine air filter
- faulty fuel injectors
- exhaust system restriction or fault
How to fix it — step by step
- Check whether the loss of power is constant or only under load, and note any warning lights
- Inspect the engine air filter and replace it if it is dirty or clogged → Shop the air filter at Amazon
- Scan for fault codes before replacing parts
- Have a shop test fuel injector operation and inspect the exhaust system if a filter and code check do not explain it → Shop the fuel injector at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the air filter.
Also tied to this fault: fuel injector - Shop at Amazon
Parts that commonly fix it
- air filter - Shop at Amazon
- fuel injector - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.