Hyundai SUV Palisade Coolant Leak

What this problem usually means

RepairPal's most reported Palisade problem is a coolant leak attributed to a cracked radiator, alongside the simpler causes of loose hose connections and a failed cap: the level in the reservoir falls, the temperature gauge creeps up, and sweet-smelling steam or pink/green crust appears at the radiator seams. Because the 3.8L will overheat quickly once the level is low, a Palisade losing coolant should be pressure-tested rather than just topped up repeatedly.

Likely causes

  1. Cracked radiator (tank or core seam failure)
  2. Loose or aged radiator/ heater hose connections
  3. Failed radiator cap not holding pressure → Shop the radiator cap at Amazon
  4. Water pump weep or thermostat housing leak → Shop the water pump at Amazon

How to fix it — step by step

  1. When the engine is cold, check the reservoir level and look for dried coolant crust at the radiator seams and hose ends → Shop the radiator at Amazon
  2. Note whether the leak is active only hot (pressure-related) or also cold, which helps locate it
  3. Have the cooling system pressure-tested to pinpoint the source before replacing parts on suspicion
  4. Do not keep driving on a falling coolant level; if the temperature warning appears, stop and let it cool before opening anything

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Hyundai SUV Palisade problems

See all Hyundai Palisade codes & guides →