Hyundai SUV Palisade (LX2, 2020–2022) Trailer Hitch Wiring Fire Risk

What this problem usually means

Palisades from 2020-2022 that have a tow hitch harness — factory-fitted or bought as a Hyundai accessory — are under NHTSA recall 22V633: debris and moisture accumulate on the harness module's printed circuit board, which can short and cause a fire, including while parked. The campaign carries a park-outside advisory, so an equipped Palisade should be checked by VIN and parked away from structures until the dealer remedy is complete.

Likely causes

  1. Moisture and debris contamination of the tow hitch harness module circuit board
  2. Electrical short in the harness module
  3. Accessory harness fitted by a previous owner (still covered — check by VIN, not by memory)
  4. Corrosion at the rear harness connector

How to fix it — step by step

  1. Check your VIN at nhtsa.gov/recalls for campaign 22V633; if it is open, park outside and away from structures until repaired
  2. Determine whether a hitch harness is actually fitted — look for the module and wiring at the rear, and ask a dealer to confirm by VIN → Shop the tow hitch harness module at Amazon
  3. Book the free dealer remedy and keep the recall paperwork with the vehicle records
  4. Do not use the trailer wiring until the recall is closed if the module shows heat damage or the circuit is blowing fuses

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Hyundai SUV Palisade (LX2, 2020–2022) problems

See all Hyundai Palisade (LX2, 2020–2022) codes & guides →