Hyundai SUV Palisade (LX2, 2020–2022) Rear Shock Clunk

What this problem usually means

Palisades with self-leveling rear suspension develop a clunking or thumping from the rear over rough roads as the self-leveling shock absorbers wear — some owners are on their second or third set — and Hyundai now covers the condition in warranty extension TSB 25-SS-004H for certain LX2 Palisades. The same wear also shows as a bouncy, unsettled rear end and a ride that stays harsh or sagging after bumps instead of recovering.

Likely causes

  1. Worn self-leveling rear shock absorbers (covered pattern, TSB 25-SS-004H) → Shop the rear shock absorbers at Amazon
  2. Worn shock upper insulators/mounts
  3. Loose or worn rear suspension links or sway bar links
  4. Cargo or spare-tire movement mimicking a suspension clunk

How to fix it — step by step

  1. Confirm the noise is from the rear suspension: empty the cargo area and secure the spare, then drive the same rough road again
  2. Bounce-test each rear corner and inspect the shocks for leaks and damaged insulators → Shop the shock insulators at Amazon
  3. Ask a Hyundai dealer to check the 25-SS-004H warranty extension against your VIN before paying for shocks
  4. Replace self-leveling shocks in pairs with the correct self-leveling units; fitting standard shocks changes the rear ride height behaviour

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Hyundai SUV Palisade (LX2, 2020–2022) problems

See all Hyundai Palisade (LX2, 2020–2022) codes & guides →