Hyundai Sedan Sonata (YF, 2011–2014) Steering Wheel Clunk

What this problem usually means

2011-2014 Sonatas (YF) share the Hyundai MDPS coupler fault: a flexible rubber coupling inside the motor driven power steering column wears and crumbles, giving a clicking or thud when you turn the wheel and a loose, clunky feel at low speed. Hyundai announced an extended warranty for this coupling on the 2011-2014 Sonata and Sonata Hybrid, so a dealer VIN check comes before any repair bill.

Likely causes

  1. Worn MDPS flexible rubber coupling in the steering column
  2. Excess play in the column or intermediate shaft
  3. Worn tie rod ends or ball joints (clunk over bumps too)
  4. Strut mount wear when turning at a standstill

How to fix it — step by step

  1. Reproduce it parked: engine on, rock the wheel left-right and listen for the clunk low in the column rather than out at the wheels
  2. Ask a Hyundai dealer to confirm the MDPS coupling warranty extension for your VIN (2011-2014 Sonata is named in the announcement)
  3. If you pay out of pocket, the coupler is an inexpensive part but fitting it means dismantling the MDPS column assembly
  4. Have the front suspension checked if the noise also occurs over bumps, to avoid replacing a coupler for a tie rod fault

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Hyundai Sedan Sonata (YF, 2011–2014) problems

See all Hyundai Sonata (YF, 2011–2014) codes & guides →