Honeywell Air purifier HPA5200 / HPA5250 / HPA5300 / HPA5350 Suddenly Turns to a Higher Setting
What this problem usually means
Frequently Asked Questions entry (VOC-sensor models only): the air purifier suddenly turned on a higher setting.
Likely causes
- The air purifier is set to Auto Mode and sensed a higher level of VOCs, so it adjusted the cleaning level accordingly
How to fix it — step by step
- Check whether the air purifier is set to Auto Mode - if it is, this behaviour is normal and no action is needed
- If you do not want automatic adjustment, select a fixed cleaning level (Quiet Clean, General Clean or Pollen) or Turbo instead of Auto Mode
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.
Related Honeywell Air purifier HPA5200 / HPA5250 / HPA5300 / HPA5350 problems
See all Honeywell HPA5200 / HPA5250 / HPA5300 / HPA5350 codes & guides →