Honda SUV Passport Rear suspension and frame corrosion

What this problem usually means

Second-generation Passports suffer rust and corrosion on the frame and suspension, with one driver reporting the SUV began to sway on the highway due to a rusted suspension piece. In 2010 Honda recalled the rear suspension and lower link brackets under NHTSA campaign 10V436000, noting that excessive corrosion may occur and can potentially cause a crash.

Likely causes

  1. excessive corrosion of the rear suspension lower link brackets
  2. frame rust and corrosion

How to fix it — step by step

  1. Do not keep driving if the vehicle sways or feels unstable at highway speed
  2. Check by VIN whether recall 10V436000 applies and was completed
  3. Have the frame, rear suspension and lower link brackets inspected for corrosion damage → Shop the rear lower link brackets at Amazon
  4. Have corroded suspension components replaced before driving the vehicle again

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Honda manual is on Honda's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Honda SUV Passport problems

See all Honda Passport codes & guides →