Hisense TV Roku TV Two Short Blinks, Pause, Repeat (Network Connection Lost)
What it should look like on your machine
then it repeats
2 blinks - then the pattern repeats. Count along with your machine and compare.
What this problem usually means
The Hisense Roku TV user guide documents one specific repeating blink pattern: two short blinks, a pause, then repeat means the TV was connected and paired with a Roku account and now has no network connection. It is a connectivity signal, not a power-supply or backlight fault code.
Likely causes
- Router or modem is off, rebooting or has lost internet
- Wi-Fi signal too weak at the TV
- Saved network is no longer available or its password changed
How to fix it — step by step
- Confirm the router/modem is on and other devices can get online
- On Google/Android-platform Hisense models run Settings > Support > Self Diagnosis > Network Test; on Roku models use Settings > Network > Check connection
- Move the wireless router to a more central location if the signal is weak, avoiding corners
- Re-select the network and re-enter the password, or restart the router and then the TV
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Wi-Fi module.
Shop the Wi-Fi module at RepairClinic or Amazon
Also tied to this fault: main board - Shop at RepairClinic or Amazon
Parts that commonly fix it
- Wi-Fi module - Shop at RepairClinic or Amazon
- main board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.