Hisense TV Roku TV Standby Light Blinking
What this problem usually means
On a Hisense Roku TV the single status indicator blinking slowly in a pulsing pattern is documented as normal activity, not a fault code: it slow-pulses while the TV is starting up from off, while it is receiving an update from USB, and while it is powering down to standby, and it dims on and off once when a remote command is received. Hisense does not publish a universal blink-count fault table for these TVs, so a slow pulse that never finishes, rather than a specific blink count, is the sign to troubleshoot startup or power.
Likely causes
- Normal startup, USB update or power-down to standby in progress
- A startup or update that has stalled and never completes
- TV is receiving repeated remote commands
How to fix it — step by step
- Watch one full startup: a slow pulsing blink should end when the picture appears or standby is reached
- If it pulses indefinitely, unplug the TV power cord from the AC outlet and re-plug after 60 seconds, per Hisense's manual restart procedure
- Disconnect USB drives and HDMI devices and try starting again
- If the TV still never finishes starting, note the exact model and the LED behaviour and contact Hisense support rather than ordering a board based on a blink count
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the power supply board.
Shop the power supply board at RepairClinic or Amazon
Also tied to this fault: main board - Shop at RepairClinic or Amazon
Parts that commonly fix it
- power supply board - Shop at RepairClinic or Amazon
- main board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.