GE Window Air Conditioner P1 Error Code
What the P1 code means
On GE Profile ClearView window air conditioners (AHTT06/AHTT08 and PHNT series), P1 means the condensate pump has had a problem or failed, and the unit shuts off.
Likely causes
- Condensate pump failure → Shop the condensate pump at RepairClinic
- Blocked or kinked drain path preventing the pump from emptying the internal tray
- Debris in the internal condensate tray
How to fix it — step by step
- Drain the indoor side of the unit following the Draining the Unit instructions in the Care and Cleaning section of the manual
- Hold down the SLEEP button for 3 seconds to clear the error message
- Restart the unit and check whether the code returns
- If the error code persists, the pump needs to be serviced - call for service
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the condensate pump.
Parts that commonly fix the P1 code
- condensate pump - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official GE manual is on GE's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.