GE Window Air Conditioner FL Error Code
What the FL code means
On GE Profile ClearView window air conditioners (AHTT06/AHTT08 and PHNT series), FL means the internal condensate tray is full, and the unit shuts off.
Likely causes
- Internal condensate tray filled with water in humid conditions
- Condensate pump unable to keep up or not draining the tray → Shop the condensate pump at RepairClinic
How to fix it — step by step
- Drain the indoor side of the unit following the Draining the Unit instructions in the Care and Cleaning section of the manual
- Hold down the SLEEP button for 3 seconds to clear the error message if it is still showing
- Restart the unit and confirm the code stays cleared
- If the error code persists, the pump will need to be serviced - call for service
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the condensate pump.
Parts that commonly fix the FL code
- condensate pump - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official GE manual is on GE's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.