Friedrich Window Air Conditioner Uni-Fit (UCT) / Chill Premier (CCW) E1 Error Code

What the E1 code means

Room temperature sensor failure on Friedrich Uni-Fit (UCT series) and Chill Premier (CCW series) window air conditioners. The Uni-Fit manual's sensor error protection section states that when a sensor is short-circuited or broken, room temperature failure shows E1, and when E1 or E2 occurs the compressor stops and the indoor fan motor operates at the set speed; the Chill Premier service manual's troubleshooting flowchart for a displayed E1 or E2 directs checking the wire connection of the indoor temperature sensor assembly, then replacing the sensor, then the main PCB.

Likely causes

  1. Room temperature sensor short circuit or open circuit (broken)
  2. Loose or damaged wire connection of the indoor temperature sensor assembly
  3. Failed main PCB

How to fix it — step by step

  1. Turn the unit off and unplug it
  2. Call a technician - the manual's flowchart is to check the wire connection of the indoor temperature sensor assembly, replace the sensor if faulty, and replace the main PCB if the code persists → Shop the indoor temperature sensor assembly at RepairClinic → Shop the main pcb at RepairClinic

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the E1 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Friedrich Window Air Conditioner Uni-Fit (UCT) / Chill Premier (CCW) error codes

See all Friedrich Uni-Fit (UCT) / Chill Premier (CCW) codes & guides →