Ford Truck F-150 Timing chain wear
What this problem usually means
On 2011-2014 F-150s with the 3.5L EcoBoost, the primary timing chain can wear and stretch, setting a check-engine light with code P0016 and causing a rattle for a few seconds on a cold start and rough running. Ford issued a service bulletin for trucks built on or before October 10, 2014 and released a dedicated repair kit; trucks with long oil-change intervals tend to show it first.
Likely causes
- Worn or stretched primary timing chain on the 3.5L EcoBoost
- Long oil-change intervals accelerating chain wear
How to fix it — step by step
- Scan for stored or pending P0016 or P0017 codes, even if the light is off
- Listen to a true cold start after the truck has sat overnight for a brief rattle
- Check oil level and oil-change history
- Have a shop confirm chain wear before authorising repair; the fix is replacement of the timing chain using Ford's repair kit → Shop the timing chain kit at Amazon → Shop the timing chain at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the timing chain.
Shop the timing chain at Amazon
Also tied to this fault: timing chain kit - Shop at Amazon
Parts that commonly fix it
- timing chain - Shop at Amazon
- timing chain kit - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.