Ford Truck F-150 Intake valve fracture causing engine failure
What this problem usually means
Certain 2021-2022 F-150s with the 2.7L EcoBoost can suffer an intake valve fracture, causing sudden misfire, loss of power, engine knocking, failure to restart and engine failure. Ford recalled the affected trucks (24V-635); NHTSA's investigation traced it to intake valve fracture and noted Ford changed the valve material in October 2021.
Likely causes
- Fracture of an intake valve in the 2.7L EcoBoost engine → Shop the intake valve at Amazon
- Broken valve material damaging the cylinder and engine internals
How to fix it — step by step
- Run the VIN through NHTSA's recall lookup for 24V-635 and confirm the remedy is complete
- Ask whether the engine or valves were ever replaced
- Do not keep driving on a sudden misfire with knocking; have the truck towed to a dealer
- Recall remedy is performed by a Ford dealer
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the intake valve.
Parts that commonly fix it
- intake valve - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.