Electrolux Washer E24 Error Code

What the E24 code means

Fault in the sensing circuit of the drain pump triac: the control board is getting the wrong signal from the pump circuit.

Likely causes

  1. Faulty triac sensing circuit on the main board
  2. Drain pump wiring problem
  3. Failed main control board

How to fix it — step by step

  1. Unplug the washer for a few minutes and restart once
  2. Make sure the pump filter is clean and the washer drains by hand test if offered
  3. If E24 returns immediately, book service
  4. The fix is normally board-level, so this is not a DIY repair

Parts that commonly fix the E24 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Electrolux washer error codes

See all Electrolux washer codes & guides →