Ecovacs Robot vacuum Deebot T10 No signal found. Unable to return to the Station

What this problem usually means

The robot cannot find the station signal and cannot return to charge.

Likely causes

  1. The Station is incorrectly placed
  2. The Station is out of power or was manually moved
  3. DEEBOT does not start cleaning from the Station
  4. The charging route is blocked, for example the door of the room with the Station is closed

How to fix it — step by step

  1. Place the Station correctly according to the instructions in the Charging DEEBOT section
  2. Check whether the Station is connected to the power supply; do not move the Station
  3. Start DEEBOT cleaning from the Station
  4. Keep the charging route clear

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Ecovacs Robot vacuum Deebot T10 problems

See all Ecovacs Deebot T10 codes & guides →