Dyson Air purifier Pure Cool Link TP02 Filter replacement indicator

What this problem usually means

When the non-washable filter unit needs replacing, the machine displays a filter pattern on the LED display. The machine is programmed to remind you after 12 months based on 12 hours of use per day; with more use the indicator activates sooner, so treat the timing as a guide only.

Likely causes

  1. Filter unit has reached the end of its programmed 12-month life

How to fix it — step by step

  1. Unplug the machine.
  2. Lift off the loop amplifier and filter unit and replace the filter unit with a new one.
  3. Reassemble the machine until the parts click into place.
  4. Press and hold the 'Standby ON/OFF' button for 6 seconds on the remote control to reset the filter indicator. A clockwise-rotating loading pattern shows on the LED display, then the machine returns to normal use.
  5. Each time you change the filter, clean the small sensor hatch on the side of the machine with a cotton swab to maintain sensor accuracy.

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Dyson Air purifier Pure Cool Link TP02 problems

See all Dyson Pure Cool Link TP02 codes & guides →