Chevrolet SUV Traverse Transmission loses 3rd, 5th and reverse gears
What this problem usually means
Some Traverses lose 3rd, 5th and reverse gears because of a cracked or fractured wave plate inside the automatic transmission, alongside wider complaints of power loss while driving, revving without power, hesitation and being unable to engage reverse on 2009-2014 and 2016 models. GM issued a Special Coverage Adjustment for the wave plate, offering dealer replacement at no charge for 10 years or 120,000 miles from first service, per the source.
Likely causes
- cracked or fractured transmission wave plate
- worn internal transmission components
How to fix it — step by step
- Stop driving if the SUV will not engage reverse or loses drive at highway speed
- Note which gears are missing and whether the loss followed revving or hesitation
- Ask a dealer whether the wave plate special coverage still applies to the vehicle by VIN and service date → Shop the wave plate at Amazon
- Have the transmission rebuilt or the wave plate replaced by a transmission shop if coverage has expired
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the wave plate.
Parts that commonly fix it
- wave plate - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Chevrolet manual is on Chevrolet's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.