Chevrolet SUV Traverse Engine failure
What this problem usually means
Engine failure is one of the most-reported problems on 2009-2012 Traverses, with notably more complaints for 2010 and 2011. Owners reported noises and a sudden loss of power that stranded them, and the most common fix was replacing the engine; the source notes NHTSA listed no engine recall for the 2010 and 2011 models.
Likely causes
- failing engine bearings
- timing chain stretching or breaking
- thrown connecting rods
How to fix it — step by step
- Pull over and switch off immediately if the engine makes loud noises or loses power → Shop the engine at Amazon
- Check the oil level and look for metal debris or a low level that could explain the failure
- Have a shop confirm the internal damage before authorizing any repair
- Replace the engine if bearings, the timing chain or a rod have failed, as the source reports was the usual fix → Shop the timing chain at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the engine.
Also tied to this fault: timing chain - Shop at Amazon
Parts that commonly fix it
- engine - Shop at Amazon
- timing chain - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Chevrolet manual is on Chevrolet's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.