Chevrolet SUV Trailblazer Sticking camshaft actuators
What this problem usually means
RepairPal lists sticking camshaft actuators among the top problems for the 2004 Trailblazer, with 109 people reporting it on that model year's page, and gives the causes as dirty oil or a faulty control solenoid. A sticking actuator disrupts valve timing, so the engine can run rough and lose response.
Likely causes
- dirty engine oil
- faulty camshaft actuator control solenoid → Shop the camshaft actuator control solenoid at Amazon
How to fix it — step by step
- Check the oil level and condition, since dirty oil is a named cause
- Scan for camshaft timing codes and note any rough running
- Have a shop test the actuator control solenoid before replacing the actuator
- Change the oil and replace the faulty solenoid or actuator as the diagnosis shows
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the camshaft actuator.
Shop the camshaft actuator at Amazon
Also tied to this fault: camshaft actuator control solenoid - Shop at Amazon
Parts that commonly fix it
- camshaft actuator - Shop at Amazon
- camshaft actuator control solenoid - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Chevrolet manual is on Chevrolet's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.