Chevrolet SUV Trailblazer Rear lights out from failed light socket plate

What this problem usually means

RepairPal lists rear lights being out due to a failed light socket plate among the top problems for the 2004 Trailblazer. A failed plate can take out tail or brake lights on the affected side, which is both a safety and a legal problem until it is replaced.

Likely causes

  1. failed rear light socket plate

How to fix it — step by step

  1. Stop and check all rear lights before driving at night if one side is out
  2. Swap in a known-good bulb first to rule out a simple bulb failure
  3. Inspect the socket plate for heat damage, corrosion or loose contacts
  4. Replace the light socket plate if the bulbs are good but the lights stay out → Shop the light socket plate at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Chevrolet manual is on Chevrolet's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Chevrolet SUV Trailblazer problems

See all Chevrolet Trailblazer codes & guides →