Chevrolet Sedan Malibu Transmission shudder and harsh shifting

What this problem usually means

Malibu transmissions have documented complaints on both units covered by the source: the CVT can shudder, hesitate and feel unresponsive, with the engine revving while the car does not respond, and the 9-speed automatic's early calibrations shifted harshly on the 1-2 and 2-3 shifts, especially when cold.

Likely causes

  1. internal cvt wear on the steel belt and pulleys
  2. early 9-speed software calibration
  3. degraded or low transmission fluid

How to fix it — step by step

  1. Note whether the shudder or harsh shift happens cold, hot, or under light acceleration
  2. Check the transmission fluid condition and level
  3. Have a dealer check for the latest transmission software calibration on 9-speed cars
  4. Have a transmission shop assess the CVT if its shudder worsens with heat, since internal wear usually means replacing the unit

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Chevrolet manual is on Chevrolet's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Chevrolet Sedan Malibu problems

See all Chevrolet Malibu codes & guides →