Chevrolet Sedan Malibu Coolant leak from water outlet housing

What this problem usually means

The 1.5-liter turbo Malibu uses a plastic water outlet housing that warps from heat cycling, cracks and leaks coolant, and the leak only gets worse once it starts. Early 2016 cars could also trap coolant air pockets that caused rough idle, shaking and, in severe cases, warped cylinder head surfaces or piston damage.

Likely causes

  1. plastic water outlet housing warping and cracking
  2. coolant air pockets in early 2016 cooling systems

How to fix it — step by step

  1. Stop driving and let the engine cool if the temperature gauge climbs or steam appears
  2. Check the coolant level and look for pink or orange residue around the water outlet housing → Shop the water outlet housing at Amazon
  3. Have a shop pressure test the cooling system if the level drops with no visible leak
  4. Replace the cracked water outlet housing and bleed the cooling system using the revised procedure

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Chevrolet manual is on Chevrolet's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Chevrolet Sedan Malibu problems

See all Chevrolet Malibu codes & guides →