Cadillac SUV XT4 Rearview camera image loss
What this problem usually means
On 2019-2020 XT4s, the video processing module (VPM) can lose communication with the rearview camera, eliminating the backup camera image: the screen goes black or distorted in reverse. NHTSA recall 22V-868 covers the condition after NHTSA opened an investigation in July 2022 following 12 complaints. Dealers update the VPM software or replace the VPM, free of charge.
Likely causes
- Video processing module losing communication with the rearview camera
How to fix it — step by step
- Confirm the camera image is blank, black or distorted when reverse is selected
- Check the VIN for open recall 22V-868
- Have the dealer update the video processing module software or replace the module under the recall → Shop the video processing module at Amazon
- Verify a stable camera image in reverse after the repair
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the video processing module.
Parts that commonly fix it
- video processing module - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.