Cadillac SUV XT4 Loss of brake boost assist
What this problem usually means
On 2020 XT4s, contamination in a sensor connection in the electronic brake boost system can interrupt communication between the sensor and the brake boost system, so electronic brake boost assist can be lost and extra pedal force is required to slow and stop the vehicle. NHTSA recall 20V-588 (GM A202307261) covers the condition, and dealers replace the electronic brake boost module free of charge.
Likely causes
- Contaminated electronic brake boost sensor connection
How to fix it — step by step
- Take a hard brake pedal, brake warning light or message, or limited vehicle speed as the warning signs
- Check the VIN for open recall 20V-588
- Have the dealer replace the electronic brake boost module under the recall → Shop the electronic brake boost module at Amazon
- Test pedal feel and assist after the repair
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the electronic brake boost module.
Parts that commonly fix it
- electronic brake boost module - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.