Cadillac Sedan CT4 Roof-rail side air bags installed incorrectly
What this problem usually means
Certain 2020 to 2022 model year CT4s are recalled (GM N212342780, NHTSA 21V-611) because the roof rail side airbags may not have been installed correctly during vehicle assembly: the airbag may have been assembled with a twist between two of the attachment points, so it may not deploy properly in a crash. There is no visible symptom. Dealers inspect both left and right roof rail airbags and correct the installation if necessary, free of charge.
Likely causes
- Roof rail side airbag assembled with a twist between attachment points
How to fix it — step by step
- Run the VIN through NHTSA's recall lookup for campaign 21V-611
- Have the dealer inspect both roof rail airbags
- Have the installation corrected if a twist is found, under the recall
- Keep the recall repair order with the vehicle's records
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.