Cadillac Sedan CT4 Loss of brake assist
What this problem usually means
On 2020 CT4s, material used in a sensor connection in the electronic brake boost system may have been contaminated during the supplier's production process, which can interrupt communication between the sensor and the brake boost system. If electronic brake boost assist is lost, a warning light and message may appear, vehicle speed may be limited, and extra pedal force is required to slow and stop. GM's recall FAQ for campaign 20V-588 (GM A202307261) states dealers will replace the electronic brake boost module at no cost.
Likely causes
- Contaminated electronic brake boost sensor connection material
How to fix it — step by step
- Take a hard brake pedal or brake warning message seriously and limit driving until it is checked
- Run the VIN through NHTSA's recall lookup for campaign 20V-588
- Have the dealer replace the electronic brake boost module under the recall → Shop the electronic brake boost module at Amazon
- Test pedal effort and confirm no warnings remain
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the electronic brake boost module.
Parts that commonly fix it
- electronic brake boost module - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.