Buick SUV Encore GX Evaporative emissions purge pump failure
What this problem usually means
The Encore GX uses an electric evaporative-emissions purge pump that can fail, setting a check engine light and trouble codes. GM issued special coverage N232395310 for 2020-2023 Encore GX models with the 1.2L or 1.3L engine (coverage is by VIN), extending the repair window for this part.
Likely causes
- Failed EVAP purge pump
- Purge pump electrical fault
How to fix it — step by step
- Have codes read - EVAP purge flow/pump codes point to the pump → Shop the evap purge pump at Amazon
- Check your VIN against special coverage N232395310 before paying out of pocket
- Confirm the pump runs during a commanded EVAP purge test
- Replace the purge pump if it fails the functional test
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the evap purge pump.
Parts that commonly fix it
- evap purge pump - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.