Buick SUV Encore GX Coolant flow control valve fault (1.3L)
What this problem usually means
On the 1.3L (L3T) engine, the coolant flow control valve can fail and set a fault (P26BB in the what-breaks guide; GM bulletin 21-NA-257 covers a low-coolant-flow code P3075 on the 1.3L), affecting temperature control and cabin heat.
Likely causes
- Failed coolant flow control valve
- Valve position sensor fault
How to fix it — step by step
- Have codes read - P26BB/P3075 point at the coolant flow valve circuit
- Watch coolant temperature behavior and cabin heat output
- Check coolant level and for leaks before condemning the valve
- Replace the coolant flow control valve if testing confirms it → Shop the coolant flow control valve at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the coolant flow control valve.
Parts that commonly fix it
- coolant flow control valve - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.