Bryant Furnace 24 Error Code

What the 24 code means

Secondary voltage fuse is open. On Bryant furnaces, code 24 means the fuse protecting the 24 V secondary circuit on the control board has blown, which points to a short circuit in the low-voltage wiring, including the thermostat leads.

Likely causes

  1. Short circuit in 24 V wiring
  2. Shorted thermostat leads
  3. Shorted accessory wiring

How to fix it — step by step

  1. Turn the furnace power off at the service switch
  2. Look at the thermostat cable where it is visible for obvious damage - do not strip or rewire it
  3. Do not just replace the fuse - it will blow again until the short is found
  4. Call a technician to isolate the short and replace the fuse

Parts that commonly fix the 24 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bryant furnace error codes

See all Bryant furnace codes & guides →